PlutoSDR Firmware

Libraries to program and use UART-based EBYTE wireless data transceivers

Remotely open audio channels and a serial port to an Icom RS-BA1 server (for ex. Icom IC-705 transceiver).

Arduino library for interfacing with CC1101 transceivers.

All HF bands QRP CW/SSB transceiver

DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.

Walki Talkie QuanSheng UV-K5/K6/UV-5R Plus Custom Firmware Merge from: ▪ @OneOfEleven and ▪ @fagci Mod w. Spectrum Analyzer ▪ by @egzumer ▪ Enhanced by @RE3CON: Full freq range of BK4819 for TX and RX: 14MHz ~ 665MHz and 745MHz ~ 1899MHz. 2nd ToneBurst 1050Hz and 1750Hz = PTT + Sidekey 1, PTT + Sidekey 2. Build with CGI 11.3.Rel1 saves some space

Your NRF24L01 transmitter that can play pokemon

QO-100 Software Transceiver using an Adalm-Pluto and an SBC (Raspberry, Odroid ...)

A patched version of the Mumble voice chat software for use with two-way radio transceivers (ham radio, CB, PMR and others).

Osmocom Transceiver used by GSM Base Transceiver Station (BTS); mirrored from https://gitea.osmocom.org/cellular-infrastructure/osmo-trx

Python implementation of CAT system for Yaesu FT-817ND.

Driver for the range of RFM95(W) (LoRA) RF transceiver modules using STM32Cube HAL

Provide LIN-Master functions (write and request LIN-Frames via hardware UART

Amateur Radio Control & Clock (RF) Solution

Implementation of OFDM and OTFS transceivers on GNU Radio (software defined radio or SDR)

This is a simple CW beacon project based on Arduino and Si5351 clock generator. It transmits a predefined message as morse code on a fixed frequency.

This project presents a 10Gb/s transceiver design using 65nm CMOS process, based on a 10GBASE-KR standard.

Raspberry Pi powered High Altitude Weather Balloon

Quansheng Wiki